Stencil-making tricks
- Test your exposure. Rather than guessing, run an exposure calculator or step-wedge test for each emulsion and light setup, and write the result down. See how long to expose screen printing emulsion.
- Keep it dry. Emulsion is mostly water, so coated screens need a dry, dark, dust-free place to dry. A dehumidifier in your drying area can make a large difference in humid climates.
- Degrease before coating. Oils and dust cause pinholes and uneven coats. Our guide to coating a screen evenly goes through it.
- Mind the glass. Some printers have found that exposing without glass between the light and film reduces pinholes in their shop, particularly with certain output setups, since there is less light diffusion and fewer surfaces for dust. Contact between film and screen still has to be good, so test whichever setup you use.
- Post-expose the screen. A little extra light after washout can harden the stencil and help it last longer.
- Keep film dark. Dense film makes cleaner stencils, so improve your film positives before blaming the emulsion.
Press setup tricks
- Set off-contact deliberately. A gap of roughly the thickness of a nickel (about 1/8 inch) is a common starting point. Adjust until the screen releases cleanly.
- Tension matters. Label screens with the date or color and retire the ones that have gone slack, because a low-tension screen causes registration trouble and blurry prints.
- Use pallet adhesive lightly, and smooth the shirt so there are no wrinkles.
- Use a placement guide so each shirt goes down in the same spot.
- Register early. For multi-color jobs, use marks and follow multi-color registration steps.
Printing tricks
- Flood, then print. Flooding the screen between strokes keeps the mesh filled and the print consistent.
- Use the sharp edge of the squeegee. If the side of the blade is pressing the ink down, you are likely using too much pressure.
- Keep your stroke consistent. A steady angle and speed matter more than force.
- Lint-roll the shirt first. Fibers show up as specks in the print, especially on dark garments.
- Print a test shirt on scrap fabric. Ideally from the same blank.
Ink and curing tricks
- Match the mesh to the ink. A lower mesh passes more ink for opacity, while a higher mesh suits fine detail.
- Keep water-based ink moving. It can dry in the screen, so keep the screen flooded between prints. In a dry shop, some printers use a fogger or steamer near the press to keep humidity up.
- Check cure temperature. An infrared thermometer, or better, a probe, tells you what the ink actually reached. For plastisol, a common target is about 320°F (160°C), but check your ink’s data sheet.
- Wash-test a sample. A stretch and wash test tells you more than a visual check.
- For white on dark shirts, see screen printing white on black T-shirts for flashing and underbase tricks.
Workflow and shop tricks
- Create a proof template. Printers who send customers a mockup with print size, color codes and placement, and get approval in writing, often report far fewer reprints.
- Mark the sleeve being printed. A small piece of tape on the sleeve prevents left/right mix-ups.
- Tag special sizes. Stiff cap inserts, written on with a marker and dropped into the collar, can flag youth sizes or color changes through the dryer.
- Print and set up in parallel. If you have two presses and help, one person can print while the next job is being set up.
- Visit other shops or follow other printers. Small ideas such as rack heights, tape removal systems and layouts are easy to borrow.
Habits that prevent reprints
- Keep a notebook or spreadsheet of what worked: mesh, emulsion, exposure, ink, cure.
- Change one variable at a time when troubleshooting. Our guide to screen printing defects is a good starting point.
- Clean screens promptly after printing, as in how to reclaim a screen.
- Try new ideas on scrap first. As one shop owner put it, no consultant can replace trying things and finding what works in your own space.
For the whole workflow in order, see the step-by-step guide to screen printing T-shirts.