Equipment and Supplies

How to Make and Stretch Your Own Screen Printing Screens

Learn how to make and stretch your own screen printing screens on a wood frame, seal and prepare them, add a stencil, and decide when pre-made screens are the better buy.

On this page
  1. Should you make your own screens?
  2. Materials and tools
  3. Choosing frame and mesh
  4. Stretching mesh on a wood frame, step by step
  5. Sealing and preparing the screen
  6. Putting a stencil on the screen
  7. How to tell if tension is good enough
  8. Buying pre-made screens instead
  9. Other homemade equipment worth making

Should you make your own screens?

Making screens is one of the easier parts of screen printing to do yourself. A wood frame, some polyester mesh and a staple gun can produce a working screen for light use, and it is a cheap way to learn. The trade-off is consistency. Hand-stretched mesh usually ends up at a lower and less even tension than factory-stretched mesh, which affects how cleanly the screen prints and how well multiple colors line up.

If you only plan to print simple one-color designs, a homemade screen is a good start. If you are heading toward multi-color work or regular production, you may prefer pre-stretched frames (more on that below).

Materials and tools

  • A frame. Wood stretcher bars or a sturdy wooden frame with flat, square corners. Canvas stretcher bars are a popular beginner choice because they are cheap and easy to find.
  • Screen printing mesh. Use polyester monofilament mesh sold for screen printing, not a general-purpose fabric. Buy it in a piece larger than the frame.
  • Staple gun and staples, or a method for gluing mesh to the frame.
  • Canvas pliers or a similar gripping tool, which help you pull the mesh evenly.
  • Scissors or a sharp knife.
  • Waterproof tape (such as screen printing or packing tape) for sealing the edges.
  • Optional: a tension meter, if you want to measure rather than guess.

Choosing frame and mesh

Make the frame noticeably larger than your design, leaving space for ink to sit at the top and for the squeegee to travel. If you are stretching on wood, remember that it can swell with water and loosen over time. Our comparison of aluminum vs wood screen printing frames explains when it is worth moving to aluminum.

For mesh, a count around 110 (about 43 threads per centimeter) is a sensible general-purpose choice for t-shirts and is often used for printing thicker inks. Finer meshes hold more detail but let less ink through. See what mesh count to use for screen printing t-shirts for how to match mesh to your ink and artwork.

Stretching mesh on a wood frame, step by step

  1. Cut the mesh a few inches larger than the frame on every side. Keep the weave aligned with the frame, so the threads run parallel to the edges rather than diagonally.
  2. Place the frame on a flat surface with the mesh draped over it.
  3. Start in the middle of one side. Pull the mesh gently and staple it near the center of that edge.
  4. Move to the opposite side and pull it taut, then staple near the center.
  5. Repeat on the other two sides, so there is a staple in the center of each edge.
  6. Work outward from the center on each side, pulling firmly and evenly and adding staples in alternating directions. Working from the middle outward helps avoid wrinkles in the corners.
  7. Fold and staple the corners neatly, and trim the excess mesh.
  8. Check the result. The mesh should be flat and drum-tight, with no ripples.

Pulling too hard can tear the mesh or distort the frame, so apply steady rather than sudden force. Do not be discouraged if your first screen is slack; many people re-stretch once or twice.

Sealing and preparing the screen

Tape over the staples and the inside edges where the mesh meets the frame, on both sides, so that ink and cleaning water cannot get behind the mesh and soak into the wood. Overlap the tape onto the mesh slightly. If you plan to use emulsion, degrease the mesh before coating so the emulsion adheres evenly.

Putting a stencil on the screen

There are three common ways to make a stencil for a homemade screen:

  • Photo emulsion. Coat the screen with a thin, even layer using a scoop coater, dry it in the dark, expose it under light with your artwork on transparency, and wash out the design. Coating instructions vary by product, including how many coats and whether to coat one side or both, so follow the manufacturer’s directions. See our emulsion comparison for help choosing one.
  • Paper or vinyl stencils. For very simple shapes, cut a stencil and place it between the screen and the shirt. This is fast but suits only small runs and loose edges.
  • Drawing fluid and screen filler. Paint the design with water-soluble drawing fluid, cover the screen with filler, then wash the drawing fluid away, which leaves the design open. This avoids darkroom steps.

How to tell if tension is good enough

A tension meter gives an exact reading, but you can also look for signs. A good screen feels firm and springs back quickly when pressed. A loose screen may sag, fail to snap off the shirt, or produce blurry, smeared prints. If the screen stays in contact with the shirt after the squeegee passes, tension is probably too low or your off-contact gap is too small.

Some people re-stretch a loose screen by removing staples and pulling again; others accept the lower tension for casual projects.

Buying pre-made screens instead

Yes, you can buy pre-made screens. Many suppliers sell pre-stretched aluminum or wood frames in standard sizes and mesh counts, and some offer re-meshing services for old frames. Pre-stretched screens save time and generally offer more consistent tension, which is helpful for detail and for multi-color registration. Many printers make a stencil at home but buy the frame. Our pillar guide to equipment and supplies shows where screens fit in the bigger picture.

Other homemade equipment worth making

If you are making your own screens, you may want to build a simple press next; see how to build your own screen printing press. And if you want to try printing before investing in anything, read can I screen print without a press.

The complete guide to equipment and supplies

Screen Printing Equipment and Supplies: What You Need
Read the guide

Keep exploring

Guides from other topics

All topics →