Equipment and Supplies

Plastisol vs Water-Based Ink: Which Should You Use?

Plastisol or water-based ink for screen printing shirts? Compare feel, opacity, durability, curing, cleanup and screen life to decide which suits your project.

On this page
  1. Short answer
  2. Quick comparison
  3. Plastisol: pros and cons
  4. Water-based: pros and cons
  5. Dark shirts and fabric type
  6. Curing, cleanup and disposal
  7. Eco and safety: not as simple as it looks
  8. Which should you use?

Short answer

If you want an ink that is forgiving to print with, works on dark shirts and is widely used for shirts, plastisol is generally the easier choice. If you want a softer, more breathable print on light cotton and are willing to manage drying in the screen and a more demanding cure, water-based ink is worth considering. Neither is best in every case; the right choice depends on your garments, your equipment and the look you want.

Quick comparison

Plastisol Water-based
How it sits On top of the fabric Soaks into the fibers
Feel Heavier, rubbery, less breathable Softer, lighter, more breathable
Screen behavior Does not dry in the screen Can dry in the mesh and clog
Dark garments Opaque, with an underbase for bright color Often semi-transparent; needs special opaque inks or discharge
Curing Heat to cure temperature, commonly around 320°F Needs water removed, plus heat setting
Cleanup Solvent-based cleaners Water-based cleanup, though disposal still needs care
Best for Bold designs, dark shirts, long runs, beginners Light cotton, soft-hand prints, vintage looks

Plastisol: pros and cons

Plastisol is PVC resin suspended in plasticizer. It is a thermoplastic, which means it stays liquid until you heat it, and it does not dry by evaporation.

Pros:

  • Forgiving on press. It can sit in the screen for long periods without clogging, and unused ink can often be returned to the container if kept clean.
  • Opaque and vivid. Plastisol comes in a range of opacities and covers dark garments well.
  • Versatile. It works with many special effects, such as puff, glitter, metallic and high-density finishes.
  • Consistent. It is usually ready to use from the container without much adjustment.

Cons:

  • Hand feel. The ink film sits on top of the fabric and can feel thick, and more opaque inks usually feel heavier.
  • Cannot be ironed. Because it is a thermoplastic, direct ironing can remelt and smear the print.
  • Solvent cleanup. Cleaning screens and tools generally requires solvents, and waste ink and cleaning residue need proper disposal.

Water-based: pros and cons

Water-based inks use water as the main carrier for pigment and binder. Many also contain co-solvents and other additives, so “water-based” does not mean “water only.”

Pros:

  • Soft hand. The ink soaks into the fabric, which gives a lighter, more breathable print.
  • Good on light natural fabrics. They suit light-colored cotton well and are popular for a worn-in or vintage look.
  • Simpler cleanup. Screens and tools can usually be cleaned with water while the ink is still wet.

Cons:

  • Dries in the screen. If the ink sits in the mesh, it can clog, and screens need flooding and prompt cleaning between prints.
  • Dark shirts are harder. Standard formulas are semi-transparent. Printing bright colors on dark garments usually requires specially formulated opaque inks or discharge methods.
  • Cure needs more care. The water has to leave the ink film and the binder has to set. Some water-based inks use additives that give the ink a limited pot life once mixed.
  • Tougher on stencils. Water-based ink can break down ordinary emulsion, so a water-resistant emulsion is usually needed; see choosing a screen printing emulsion.
  • Screen life. Screens often wear out sooner with water-based printing than with plastisol.

Dark shirts and fabric type

On dark garments, plastisol with a white underbase is the usual approach, with a lower-count mesh to lay down enough ink; see what mesh count to use. Water-based inks work best on light, natural fibers like cotton, and blended fabrics absorb them less well. Polyester can cause dye migration with either ink type, so low-bleed formulations and test prints are important. For more on fabric, see what type of material is used for t-shirts.

Curing, cleanup and disposal

  • Plastisol needs the entire ink film to reach its cure temperature, so use a proper dryer or heat source and verify the temperature with a probe or infrared thermometer.
  • Water-based inks need drying capacity to remove water, and many craft-level inks are designed to air dry or be heat-set per the label.
  • Disposal rules vary. Uncured and cured waste, solvents and cleaning water may be regulated differently in your area, so check with your local authority and read the safety data sheet.

Eco and safety: not as simple as it looks

Water-based inks are often marketed as the greener option, and in some respects they are, since they avoid PVC and can reduce solvent use for cleanup. But they contain binders and additives, some inks include co-solvents, and wash water still carries pigment and solids. Plastisol has its own issues, including PVC content and solvent cleanup. If environmental or health impact matters to you, compare the specific products’ data sheets, ventilate your workspace, and wear gloves and eye protection.

Which should you use?

  • First-time printer with a heat source that reaches cure temperature: plastisol is generally the easiest to learn on.
  • Craft projects cured by iron or heat press: a water-based fabric ink made for that purpose may be more practical.
  • Dark shirts and bright, opaque colors: plastisol.
  • Soft, breathable prints on light cotton: water-based, or discharge for suitable dyed fabrics.
  • Frequent pauses on press: plastisol, because it will not dry in the screen.

For more on selecting inks and matching colors, see screen printing ink for t-shirts, and for the overall setup, see our equipment and supplies guide.

The complete guide to equipment and supplies

Screen Printing Equipment and Supplies: What You Need
Read the guide

Keep exploring

Guides from other topics

All topics →