Equipment and Supplies

Best Screen Printing Emulsion: Diazo, Photopolymer and Dual-Cure Compared

Compare diazo, dual-cure, photopolymer and capillary film screen printing emulsions, and learn which is the best choice for beginners based on ink, exposure light and budget.

On this page
  1. Short answer
  2. The main emulsion types
  3. Comparison
  4. How to choose
  5. Match emulsion to ink and exposure light
  6. Coating, drying and exposing tips
  7. Storage, safety and reclaiming

Short answer

For most beginners, a dual-cure emulsion (a blend of diazo and photopolymer chemistry) or a pre-sensitized photopolymer is the safest starting point. Dual-cure emulsions tend to tolerate a wider range of exposure times and work with most inks, which makes them forgiving when your darkroom and light source are not perfect. Pre-sensitized photopolymers need no mixing and expose quickly, but you will need to dial in your exposure time. Straight diazo is often the budget pick, with slower exposure. The “best” emulsion depends on your ink, your exposure light and how much you print.

Always read the manufacturer’s data sheet, since products vary within each category.

The main emulsion types

Diazo

Diazo emulsions are sold as a base emulsion and a separate sensitizer that you mix in before use. They tend to be inexpensive and have a long shelf life before mixing, but once sensitized they have a limited working life (often weeks, depending on storage and manufacturer). They generally expose more slowly than photopolymers, which can make them forgiving of timing errors but slower to work with. Many are not especially water-resistant, so check whether a product is suitable for water-based inks.

Dual-cure

Dual-cure emulsions combine diazo sensitizer and photopolymer, and are the common all-rounder. They are typically mixed before use, expose faster than diazo alone, and tend to offer good resistance to a range of inks. Many shops choose them as their everyday emulsion.

Photopolymer (pre-sensitized)

Photopolymer emulsions are sold ready to use. They expose quickly and can hold fine detail, which suits high-detail work and shops that want less mixing. They can be more expensive, and they are sensitive to light, so handling and storage need care. Because they expose quickly, over- or under-exposure can happen more easily, so run a test.

Capillary film

Capillary film is a pre-made stencil film that is applied to the screen, usually with water, rather than coated from a bottle. It gives a very even stencil thickness and avoids coating and drying time. It costs more per screen and is mostly used where consistency and speed matter.

Comparison

Diazo Dual-cure Photopolymer Capillary film
Mixing needed Yes Usually yes No No
Exposure speed Slower Medium Fast Fast
Forgiveness on exposure Generally good Generally good Narrower window Depends on product
Detail Good Good Very good Very good
Ink resistance Varies; check data sheet Generally broad Varies; check data sheet Depends on product
Cost Usually lowest Mid Often higher Highest per screen
Good for Budget, slow learning Beginners and general use Fast, detailed work Consistency, quick setup

Prices shift by brand and region, so compare current listings rather than relying on a number.

How to choose

  1. Start with your ink. If you plan to use water-based ink, pick an emulsion labeled water-resistant, since standard emulsions can break down quickly against it. Plastisol is gentler on most emulsions; see plastisol vs water-based ink.
  2. Check your exposure light. Exposure units use different light sources, such as fluorescent, metal halide or LED. Emulsions respond differently to each, and some are formulated for LED units. Confirm compatibility with the supplier.
  3. Think about volume. Occasional printers do well with a forgiving all-rounder. Shops running daily may value faster exposure and tougher stencils.
  4. Consider detail. Fine halftones and small text need a high-resolution emulsion and the right mesh; see what mesh count to use.
  5. Buy fresh stock in a size you will use. Emulsion has a shelf life, and a large container is no bargain if it expires before you use it.

Match emulsion to ink and exposure light

If you are unsure, ask the supplier which emulsion they recommend for your combination of ink, mesh and light source, and tell them whether your lamp is LED, metal halide or something else. Beginner kits sometimes pair a specific emulsion with a specific light; see best home screen printing kits.

Coating, drying and exposing tips

  • Degrease the mesh before coating so the emulsion adheres evenly.
  • Coat in a dim or safelit area, and keep coated screens in the dark while drying. Follow the manufacturer’s directions on how many coats to apply and on which sides.
  • Dry screens fully before exposure. Damp emulsion exposes poorly.
  • Run an exposure test (a step-wedge or exposure calculator) to find the right time for your setup, rather than guessing.
  • Use good contact between the transparency and the screen, so edges stay sharp.
  • Wash out gently with a spray of water, and let the screen dry before use.

Your frame and mesh also matter to the end result; see aluminum vs wood frames and stretching your own screens.

Storage, safety and reclaiming

Store emulsion in its original opaque container, away from heat and light, and use it within the manufacturer’s stated life. Diazo sensitizer and emulsion remover are chemicals, so wear gloves and eye protection, ventilate the space, and read the safety data sheet. Dispose of waste according to local rules. After a job, remove the stencil with a suitable emulsion remover and clean the mesh so the screen can be recoated. For the rest of a starter setup, see our equipment and supplies guide.

The complete guide to equipment and supplies

Screen Printing Equipment and Supplies: What You Need
Read the guide

Keep exploring

Guides from other topics

All topics →