Printing Process

How to Make Film Positives for Screen Printing

How to make film positives for screen printing: printer and film choices, getting dense black, RIP software, outsourcing and quick alternatives.

On this page
  1. What a film positive does
  2. What makes a good positive
  3. Option 1: Print on inkjet film at home
  4. Option 2: A dedicated black-ink setup with RIP software
  5. Option 3: Order film output from a service
  6. Quick alternatives for simple art
  7. Prepare the artwork file
  8. Check density and orientation before exposing
  9. Troubleshooting weak or smudged film

What a film positive does

A film positive is a transparent sheet carrying your artwork in solid black. During exposure, the black blocks UV light so the emulsion underneath stays soft and can be washed out, leaving an open stencil. Everywhere else, light hardens the emulsion. If the black is not dark enough, some light leaks through and partly hardens the emulsion you wanted to wash away.

You need one film for each color in your design. The overall workflow, including where film fits, is in our step-by-step guide to screen printing T-shirts.

What makes a good positive

  • Dense, opaque black. This matters more than anything else. Held up to a bright light, the black areas should look solid, with no visible streaks or pinpricks of light.
  • Sharp edges. Fuzzy edges produce fuzzy stencils, which matters for small text, fine lines and halftones.
  • A surface that holds ink without smudging. Films made for inkjet printing usually have a coating that grips the ink.
  • Correct size and placement. The artwork should be at final size with registration marks if you are printing more than one color.

Option 1: Print on inkjet film at home

The simplest approach is an inkjet printer and film sold for screen printing, often called inkjet transparency or output film. Regular office transparency sheets or plain paper are usually a poor substitute, as the ink beads up or does not get dark enough.

Things to try:

  • Set the print quality to the highest setting and choose the media type that matches your film.
  • Print the artwork in 100% black rather than rich black or a mix of colors, so the printer lays down the most ink possible. Some drivers allow a black-only or grayscale mode, which helps.
  • Let the film dry fully before handling it, and avoid touching the printed side.
  • If the black looks weak, you can print two copies and stack them in register on the screen. This can improve density, but be careful to line the copies up exactly, since any shift will soften the edges.

Results vary a lot by printer and film, so test a sample by exposing a screen before relying on it.

Option 2: A dedicated black-ink setup with RIP software

Print shops that make a lot of film often convert an inkjet printer to run on black only and use RIP (raster image processor) software. Squeegee & Ink, a UK print studio, describes using an Epson SureColor T7200 with refillable cartridges filled with black pigment, replacement chips so the printer accepts them, and AccuRIP Black Pearl as the RIP software. They report this gives a dense black output on rough-sided output film.

A few cautions:

  • Converting a printer can void the manufacturer’s warranty, as that studio itself notes. Treat it as an advanced option and follow your own research.
  • Software and film choices need to be compatible with your specific printer.
  • It is generally more cost-effective if you will be printing film regularly.

Option 3: Order film output from a service

Several screen printing suppliers and print studios print film positives for other printers. This avoids buying a printer, learning RIP software and managing inks. Services typically ask for artwork that is:

Some services offer oversized film for large prints. If you only print occasionally, or you need high-detail halftones and fine lines, outsourcing is worth considering.

Quick alternatives for simple art

For simple, bold designs, some people use other methods:

  • Photocopy or laser print onto transparency film made for that machine. Density is often lower than inkjet film, so check carefully, and be sure the film is rated for the printer, since the wrong film can melt in a laser printer.
  • Hand-drawn art with an opaque black marker or ink on clear acetate or tracing material. This works for bold shapes, but larger black areas can be uneven.
  • Cut paper stencils held against the screen, which can be used for very simple shapes.

These may not hold fine detail or halftones, so test with a screen before committing a real order.

Prepare the artwork file

  1. Size the artwork to the final print size.
  2. Separate each color onto its own layer or page.
  3. Convert everything to pure black on a white or transparent background.
  4. Add registration marks or crosshairs in the same position on every separation.
  5. Mirror or flip only if you have a reason to. Many printers place the film with the inked side against the screen, with the artwork reading correctly when viewed from the squeegee side. Do a quick test with text or an arrow so you do not expose a backwards image.

For halftones and photos, check that your dot size and line frequency suit your mesh count. That topic is covered in four-color process screen printing.

Check density and orientation before exposing

  • Hold the film over a bright lamp or window and look for thin spots.
  • Check small text and fine lines for gaps.
  • Confirm the film is the right way round on your screen. A scrap exposure test with text can save a coated screen.

If a stencil exposes but fine details wash away or edges look rough, the film may be at fault, or the exposure may be wrong. See how long to expose screen printing emulsion for ways to test exposure separately.

Troubleshooting weak or smudged film

Symptom Likely cause What to try
Black looks gray or streaky Low ink coverage, wrong media setting Use black-only mode, highest quality, correct film setting, or stack two films
Ink smudges or scratches off Film not dry, wrong film type Let film dry longer, use inkjet-coated film
Stencil detail washes out Light leaking through the film, or underexposure Improve density, then retest exposure
Soft or fuzzy edges Low resolution, poor contact Increase output quality, ensure film is flat against the screen
Backwards design Film flipped Check orientation with a text test

Once you have film you trust, it becomes one of the more repeatable parts of the process.

The complete guide to printing process

How to Screen Print T-Shirts: A Step-by-Step Guide
Read the guide

Keep exploring

Guides from other topics

All topics →