Short answer
Aim for 300 DPI at the actual printed size for raster artwork. Many print-on-demand services accept lower, with 150 DPI commonly cited as a workable minimum for apparel, but sharpness drops as you go lower. Images at 72 DPI usually look soft or pixelated on fabric. Vector artwork does not have this problem. Printers set their own limits, so check the guidelines of the one you use.
DPI, PPI and pixels: what the terms mean
- Pixels are the dots that make up a raster image, for example 3600 x 4800.
- PPI (pixels per inch) is how many of those pixels are spread over each inch of the print. It is the number Photoshop shows.
- DPI (dots per inch) is how many dots a printer lays down per inch. In everyday use, people often say DPI when they mean PPI.
The part that matters is the relationship: pixels = print size in inches x PPI. A 3600-pixel-wide image printed 12 inches wide is 300 PPI. The same image printed 24 inches wide is only 150 PPI. Resolution is not a property of the image alone, it depends on how big you print it.
Pixel sizes for common shirt print areas
| Print area | Size | At 300 ppi | At 150 ppi |
|---|---|---|---|
| Full front or back | 12 x 16 in | 3600 x 4800 px | 1800 x 2400 px |
| Youth or smaller print | 8 x 10 in | 2400 x 3000 px | 1200 x 1500 px |
| Left chest logo | 3.5 x 3.5 in | 1050 x 1050 px | 525 x 525 px |
Maximum print sizes vary by printer. Our guide to setting print size in Photoshop shows how to create a document at these sizes.
What if my image is too small?
Enlarging a small image does not add detail. Options, from best to worst:
- Find or create a bigger original. Photos from a modern phone or camera are often large enough.
- Redraw it as vector. Tracing a logo or simple illustration gives artwork that scales to any size.
- Print it smaller. A small image that is too soft for a full front may be fine as a pocket or left-chest print.
- Use an upscaling tool carefully. Some design tools and AI upscalers can add pixels and improve apparent sharpness. Results vary, so inspect them closely at full size before you use them.
Print the design at actual size on a home printer. If it looks chunky on paper, it will look chunky on a shirt, though fabric can hide some flaws.
Does vector art need DPI?
No. Vector files such as AI, EPS and SVG describe shapes with maths rather than pixels, so they are sharp at any size. They only get turned into pixels when they are printed or exported. If a printer asks for one, send it. See vector vs raster artwork.
Screen printing and halftones
Screen printers produce a film for each ink colour. Photographic or shaded artwork has to be converted to halftone dots, and the dot size has to suit the mesh count of the screen. A common rule of thumb is that mesh count is roughly four to five times the lines per inch of the halftone, but shops have their own preferences, so ask what they need. A high-resolution source (or clean vector art) gives them the most room to work.
Quick checks before you send a file
- Is the image at least 150 PPI, and ideally 300, at the printed size?
- Did you enlarge it after saving? If so, the real resolution is lower than it looks.
- Is the background transparent where it should be?
- Is the file format right for your method? See the best file format for t-shirt printing and t-shirt design software and file setup.