Short answer
On cotton and everyday garments, screen printing is generally regarded as the longest-lasting print method when the ink is properly cured. On polyester, dye sublimation is the most permanent option, because the dye bonds with the fibres instead of sitting on top. Embroidery, which uses thread, is not a printing method but usually outlasts any ink. DTF and heat transfer vinyl sit in the middle, and DTG is commonly ranked lowest of the main methods, though a well-made DTG print can still last for a long time.
Durability ranking by method
The ranking below is a general pattern, not a guarantee. Results vary by shop, ink, garment and care.
| Method | General durability | Why | Fabric limits |
|---|---|---|---|
| Sublimation | Very high on polyester | Dye becomes part of the fibre, so it does not crack or peel | Light polyester only |
| Screen printing | Very high on cotton and blends | Ink is cured with heat and bonds to the fabric | Wide range |
| DTF | Good | Film and adhesive bond to the surface | Wide range; edges can lift over time |
| Heat transfer vinyl | Good | Adhesive bonded by heat and pressure | Most fabrics; can crack or lift |
| DTG | Moderate to good | Ink soaks into fibres but is thinner | Best on cotton |
Wash-count numbers circulate online, for example “100 or more washes for screen printing” or “20 to 30 for DTG”, but they come from different vendors without a common test, so treat them as rough claims. The relative order is more reliable than the numbers.
Why each method wears the way it does
- Screen printing. Thick, cured ink layers are tough, and a print that is cured fully often outlasts the shirt. Over many washes it can fade or crack gradually, especially if it was under-cured.
- Sublimation. Because the colour is inside the polyester fibre, there is no layer to crack. It cannot be used on cotton or dark shirts.
- DTF. The design is a film with adhesive on the surface. When pressed correctly it can be very hard-wearing, but poor pressing or low-quality materials can lead to peeling at the edges. Some printers argue screen printing is superior on longevity.
- Heat transfer vinyl. Durable on simple designs, but large pieces can stiffen, and edges may lift.
- DTG. Ink bonds into the fabric rather than forming a thick layer, so colours can fade sooner than screen prints, particularly on dark shirts and with rough washing.
See our guide to DTG printers and pigment ink and what DTF printing is for more on each process.
What affects print life besides the method
- Curing. Under-cured ink is one of the most common causes of prints failing. Plastisol, a common screen printing ink, is typically cured at around 320°F (160°C), and the whole ink layer must reach temperature, not just the surface.
- Pretreatment and pressing. For DTG and DTF, correct pretreatment, heat and pressure matter.
- The garment. Fabric type, weave and quality change how a print ages. See best blank t-shirts for printing.
- Artwork. Very thin lines and tiny details wear faster than bold shapes.
- Care. How you wash and dry matters as much as how it was printed.
How to wash printed shirts
- Turn the shirt inside out.
- Wash in cold or cool water on a gentle cycle with mild detergent.
- Avoid bleach and fabric softener.
- Hang dry or tumble dry on low heat.
- Do not iron directly on the print.
- Follow any care label from the printer, which takes priority.
How to choose when durability matters most
- Cotton shirts you want to last for years: screen printing.
- Polyester sportswear: sublimation.
- Detailed, multi-colour designs in small runs: DTF or DTG, accepting somewhat less longevity, and following care instructions carefully.
- Names and numbers: heat transfer vinyl.
For a head-to-head view of the three most common methods, see the key differences between DTF, DTG and screen printing. For a wider comparison, see screen printing vs digital printing.