DTF in one paragraph
DTF stands for direct-to-film. A design is printed onto a special PET film, coated with a fine hot-melt adhesive powder, and then transferred to a garment with a heat press. The film is peeled away, leaving the ink and adhesive bonded to the fabric. Because the print is made on film first, the same process works on cotton, polyester and blends, and the garment does not need the pretreatment that DTG uses. It came into wide use among small and mid-sized shops in the early 2020s.
How DTF printing works, step by step
- Prepare the design. The artwork is set up as a high-resolution file, and it is printed in mirror image so it reads correctly once transferred.
- Print on film. A DTF printer prints the colour layers, and then a layer of white ink to create an opaque backing, onto the film. Water-based pigment inks are typically used.
- Apply adhesive powder. While the ink is still tacky, a thermoplastic hot-melt powder is applied to the printed areas. The excess is shaken off.
- Cure the powder. Heat melts the powder so it bonds to the ink. Cured transfers can be stored and used later.
- Press onto the garment. The transfer is placed on the shirt and heat-pressed. Published guidance often cites roughly 160 to 170°C (320 to 338°F) for around 10 to 15 seconds, but settings depend on the film and powder, so follow the supplier’s instructions.
- Peel the film. Depending on the film, it is peeled hot or cold. Cold peel is common.
Equipment you need
- A DTF printer. These are roll-to-roll inkjet printers with colour and white ink channels, usually using a white ink circulation system to avoid settling and clogged printheads.
- Film, ink and powder. All designed for the DTF system.
- A powder shaker or curing unit, which can be a separate unit or built into the printer set-up.
- A heat press with even temperature and pressure.
A regular desktop inkjet or laser printer cannot make DTF transfers. Services that print DTF transfers for you let you skip the machinery and just use the heat press.
What DTF does well
- Full-colour designs with gradients and fine detail.
- Works across a broad range of fabrics, including cotton, polyester and blends.
- No screens, so small runs are practical.
- Transfers can be printed ahead and stored.
- Suits garments that DTG handles poorly.
Drawbacks to know about
- The print tends to sit on top of the garment as a thin film, so it can feel less soft than DTG or sublimation, and some people find it plasticky.
- The result depends on film, powder and technique, so quality varies between suppliers.
- Equipment is specialised, and the powder and heat need proper ventilation.
- It is not ideal to iron directly over the print. Turning the shirt inside out is the usual advice.
- Each design still needs its own print, so cost per shirt does not fall as far as screen printing at volume.
DTF vs DTG vs screen printing
DTF usually sits in the middle: more fabric flexibility than DTG, and simpler for small runs than screen printing. Screen printing is generally regarded as more durable on cotton and cheaper per shirt at volume. For a full comparison, see the key differences between DTF, DTG and screen printing and our guide to DTG printers and pigment ink.
Caring for DTF prints
Wait before the first wash if the transfer instructions say so, wash inside out in cool water, avoid bleach and avoid high heat. Do not iron directly on the design. See which method lasts the longest.
Is DTF right for you?
DTF is a good option if you want detailed, multi-colour designs on mixed fabrics in small or medium quantities. If you only need a few shirts, buying DTF transfers or ordering prints from a service may cost less than a printer. See best t-shirt printing method for small orders.