Short answer
In Photoshop, go to Image > Image Size, set the width and height in inches or centimetres, and set the resolution (commonly 300 pixels per inch for print). Untick Resample if you only want to change the stated print size without adding or removing pixels. For a new design, it is cleaner to set the size and resolution in File > New before you start. Menu layouts differ slightly between Photoshop versions.
Method 1: set the size when you create the document
Starting at the correct size avoids resizing later.
- Choose File > New.
- Change the units to inches or centimetres.
- Enter the width and height of the printed design, for example 12 x 16 inches for a full front print.
- Set Resolution to 300 pixels per inch (some services accept less, such as 150, so check the requirements).
- Choose RGB colour mode unless your printer asks for something else.
- Set the background to Transparent unless the background is part of the design.
- Click Create.
Method 2: change the print size of an existing image
- Open the image and choose Image > Image Size (Ctrl+Alt+I on Windows, Cmd+Option+I on Mac).
- Set the unit dropdowns beside Width and Height to inches or centimetres.
- Keep the chain (constrain proportions) icon on so the picture does not stretch.
- Decide on Resample (see below).
- Enter the width or height you want, and check the resolution.
- Click OK.
What the Resample checkbox does
- Resample off: Photoshop keeps the same number of pixels and changes only the print size or resolution. Making the print size larger lowers the resolution, so the image gets softer when printed. This is a good way to see what resolution you really have at the size you want.
- Resample on: Photoshop adds or removes pixels. Making an image larger this way creates new pixels by guessing, so it does not add true detail and can look soft. Shrinking an image is safer than enlarging it.
If your resolution drops well below the 150 to 300 range at the size you need, the safest fixes are to start from a larger source image, redraw the artwork as vector, or print it smaller. See what DPI and resolution you need.
Pixel sizes for common shirt print areas
At 300 pixels per inch, pixel size is simply inches multiplied by 300.
| Print area | Size | Pixels at 300 ppi |
|---|---|---|
| Full front or back | 12 x 16 in | 3600 x 4800 |
| Youth or smaller print | 8 x 10 in | 2400 x 3000 |
| Left chest logo | 3.5 x 3.5 in | 1050 x 1050 |
These are typical examples. Maximum print area depends on the printer or service, so check their guidelines.
Export for printing
For digital printing, export a PNG with a transparent background. Use File > Export > Export As and choose PNG, or File > Save a Copy. Check that the dimensions are right before saving. For screen printing, the printer will usually want vector artwork instead. See the best file format for t-shirt printing.
Print dialog scale (for paper proofs only)
If you want a paper proof of your design at actual size:
- Choose File > Print.
- Select your printer.
- Under Position and Size, untick Scale to Fit Media.
- Set Scale to 100%.
Printing a proof at actual size is a useful way to check that fine detail is crisp. The Print dialog does not change the size of the file you send to a t-shirt printer.
Common problems
- Image looks blurry at the size you need: the resolution is too low. Start from a bigger file or vector art.
- Design looks fine on screen but prints small: the document was saved at a small print size. Check Image Size.
- Stretched artwork: the proportions were not constrained.
For a complete workflow, including mockups, see t-shirt design software and Photoshop print settings.