Printing Methods Compared

How to Print on T-Shirts at Home

Print t-shirts at home with transfers, stencils, fabric paint, vinyl or DIY screen printing, including options without transfer paper and for your own drawings.

On this page
  1. Ways to print on a shirt at home
  2. How to print on a shirt without transfer paper
  3. How to print your own drawing on a shirt
  4. How to screen print a shirt at home, step by step
  5. Tips that apply to every method
  6. Caring for a home-printed shirt
  7. When home printing stops making sense

Ways to print on a shirt at home

You can print a shirt at home without a professional printer. The main options differ in cost, skill and how long the result lasts.

Method What you need Good for Trade-offs
Iron-on transfer paper Inkjet or laser printer, transfer paper, iron or heat press Full-colour images, one-offs Can feel like a patch; may crack or peel over time
Heat transfer vinyl (HTV) Vinyl, a cutting machine, weeding tool, iron or heat press Text, logos, simple shapes Fine detail is slow to weed
Stencil and fabric paint Stencil, fabric paint, brush or sponge Bold shapes, hand-made look Hard to get fine edges
Fabric markers Textile markers Drawings and line art Slow for large areas
DIY screen printing Screen, emulsion, light source, squeegee, textile ink Repeating a design on several shirts Most setup and learning

How to print on a shirt without transfer paper

If you do not have transfer paper, or you would rather avoid it, these options need none.

Stencil and fabric paint

  1. Cut a stencil from freezer paper, stencil film or adhesive vinyl.
  2. Pre-wash and dry the shirt, then slide cardboard inside so paint cannot soak through to the back.
  3. Fix the stencil flat with tape or a light spray adhesive.
  4. Dab thin coats of fabric paint with a sponge or stiff brush. Several thin coats usually give cleaner edges than one thick coat.
  5. Peel the stencil while the paint is slightly damp, let it dry fully, then heat-set following the paint instructions.

Fabric markers and pens

For a drawing, simply draw on the pre-washed shirt with textile markers, over a cardboard insert. Heat-set as directed on the packaging.

Heat transfer vinyl

HTV is cut rather than printed. Mirror the design in your cutter software, cut with the shiny carrier side down, weed away the excess, then press with a heat press or iron at the vinyl maker’s settings.

How to print your own drawing on a shirt

There are a few routes, depending on the look you want:

  • Draw directly on the shirt with fabric markers or paint.
  • Make a stencil by tracing or printing your drawing, then cutting it out. This works best for bold, high-contrast art.
  • Scan or photograph the drawing, clean it up on a computer, and turn it into a one-colour black-and-white image. You can then use it as a vinyl cut file, as a film positive for a screen, or print it as an iron-on transfer. For file basics, see our guide to t-shirt design software and file setup.

Thicker, cleaner lines transfer to stencils and screens better than fine pencil shading.

How to screen print a shirt at home, step by step

DIY screen printing is the best of these methods if you want several copies of one design. Kit instructions vary, so follow your kit where it differs.

  1. Make your artwork. Create a black-and-white design and print it on transparency film. Print it solid black so it blocks light.
  2. Coat the screen. In dim light, spread an even layer of photo emulsion on the screen and let it dry in the dark.
  3. Expose. Lay the film on the screen and expose it to a bright light source. Exposure times depend on the emulsion and the light, so run a test first.
  4. Wash out. Rinse the screen with water until the design area opens up. Let it dry.
  5. Set up. Place the shirt on a flat surface with cardboard inside. Position the screen and tape the edges so ink cannot leak around the design.
  6. Print. Put a line of textile ink above the design and pull it across with a squeegee using firm, even pressure. A second light pass can help.
  7. Cure. Let the ink dry, then heat-set it as the ink maker directs, often with an iron or heat press and a cloth.
  8. Clean the screen straight away so ink does not dry in the mesh.

A cheap kit or a vinyl stencil on a screen will usually wear out sooner than a properly made emulsion screen. Work with good ventilation, wear gloves and follow the safety notes on your emulsion and ink.

Tips that apply to every method

  • Pre-wash the shirt to remove sizing and avoid shrinking after printing.
  • Test on scrap fabric first.
  • Print on a hard, flat surface. An ironing board can give uneven pressure.
  • Choose a suitable shirt. Smooth, mostly cotton shirts are a good starting point. See our guide to the best blank t-shirts for printing.
  • Read the instructions for your transfer, vinyl, paint or ink and follow their temperatures and times.

Caring for a home-printed shirt

Wait for the print to fully set before washing. Wash inside out in cold water with mild detergent, avoid bleach and avoid high-heat drying where you can. Do not iron directly on the print.

When home printing stops making sense

Home methods work well for gifts, hobbies and small batches. If you need dozens of shirts, many colours, or prints that survive years of washing, a print service may be easier. Read t-shirt printing methods compared or best t-shirt printing method for small orders to decide.

The complete guide to printing methods compared

T-Shirt Printing Methods Compared: Which Is Best?
Read the guide

Keep exploring

Guides from other topics

All topics →