Heat Transfers and HTV

How to Print T-Shirts with Transfer Paper

A practical guide to printing t-shirts with transfer paper: light vs dark paper, mirroring, printer settings, pressing, peeling, aftercare and troubleshooting.

On this page
  1. What Transfer Paper Is and When It Makes Sense
  2. Light vs Dark Transfer Paper
  3. What You Need
  4. Step 1: Prepare and Print Your Design
  5. Step 2: Trim the Design
  6. Step 3: Prepare the Shirt
  7. Step 4: Position and Press
  8. Step 5: Peel the Backing
  9. Making the Print Last
  10. Troubleshooting
  11. When to Move On

What Transfer Paper Is and When It Makes Sense

Transfer paper is coated paper you print on with a home printer, then press onto fabric with heat. You don’t need a cutting machine or vinyl, and you can print full-color photos and artwork. For a one-off gift, costume or event shirt, it is one of the cheapest ways to get started.

The trade-offs are real. Transfer paper usually sits on top of the fabric rather than becoming part of it. It can feel heavier than other methods and may wear faster with washing. If you plan to sell shirts or want a very soft feel, consider heat transfer vinyl or another method from our heat press printing guide.

Light vs Dark Transfer Paper

Choose the paper based on the shirt color.

  • Light fabric paper has a transparent background. White parts of your design are not printed, so the shirt color shows through. It works best on white or pale shirts. You normally mirror the image before printing, since the paper is placed face down.
  • Dark fabric paper has an opaque white layer, so colors stay visible on dark shirts. You normally do not mirror the image, and you need to trim close to the design because the white layer around it will otherwise show.

Always follow the instructions on your specific paper. Some products differ.

What You Need

Step 1: Prepare and Print Your Design

Use a high-resolution image. Low-resolution images tend to look blurry on fabric, and many guides suggest around 300 DPI at the printed size.

Mirror the design if you’re using light fabric paper. Then, in your print settings, choose a paper type such as photo, matte photo or specialty paper, and set the highest quality. Check which side of the paper is printable, and note that loading direction depends on your printer’s paper path. Feed single sheets, because coated sheets can stick together.

Let the ink dry fully before handling.

Step 2: Trim the Design

Cut around the artwork. On light paper, a small margin is usually fine, but a closer trim reduces the visible film. On dark paper, cut as close to the edge as possible so no white border shows.

Step 3: Prepare the Shirt

Wash and dry the shirt without fabric softener if possible, since residue can interfere with adhesion. Press it briefly to remove wrinkles and moisture. Lay it on a firm, flat surface.

Step 4: Position and Press

Place light paper face down and dark paper in the orientation your instructions describe. Use the temperature, time and pressure on the packaging. Many papers call for a hot setting with no steam. With an iron, turn steam off, press firmly with your weight, and cover the whole design, paying attention to the edges. Edges are often the first part to lift.

Step 5: Peel the Backing

Your paper is either hot peel or cold peel. Hot peel means removing the backing right after pressing. Cold peel means waiting until it cools completely. Peel slowly from a corner. If part of the design lifts, lay the backing down and press again.

Some manufacturers suggest a short final press with parchment paper over the design to smooth the surface.

Making the Print Last

  • Wait about 24 hours before the first wash, or follow your paper’s instructions.
  • Turn the shirt inside out and wash cold on a gentle cycle.
  • Avoid bleach and fabric softener.
  • Air dry or tumble dry on low.
  • Don’t iron directly on the print.

Troubleshooting

  • Backwards text. Mirroring was skipped or applied to the wrong paper type.
  • Faded colors. Check printer settings, ink levels and pressing heat and pressure.
  • White box or halo. Trim closer to the artwork.
  • Cracking or peeling. Often caused by light pressure, short press time or washing too soon. See also why heat transfer vinyl peels, where several causes overlap.
  • Stiff feel. This is common with transfer paper, especially for dark shirts.

For a quick-reference version of the steps, see how to use transfer paper for t-shirt printing.

When to Move On

If you want a softer feel, more durability, or are selling shirts, consider vinyl, DTF or screen printed transfers. See screen printed heat transfers for another route.

The complete guide to heat transfers and htv

Heat Press T-Shirt Printing: A Complete Guide
Read the guide

Keep exploring

Guides from other topics

All topics →