Quick Answer: The Steps
To use transfer paper for t-shirt printing:
- Choose light or dark transfer paper to match the shirt.
- Mirror the image if you are using light-fabric paper. Don’t mirror for dark-fabric paper, unless your paper’s instructions say otherwise.
- Print on the correct side using a high-quality setting and a photo or specialty paper type.
- Let the ink dry, then trim around the design.
- Press the transfer onto a pre-pressed shirt with a heat press or iron, following the paper’s temperature, time and pressure.
- Peel the backing hot or cold, as the paper instructs.
- Wait before washing, often around 24 hours.
Each step is explained below. For the longer walkthrough, see how to print t-shirts with transfer paper.
Pick the Right Paper
Light paper is transparent, so it works on white and pale shirts. Dark paper has an opaque white layer, so it works on dark shirts, but you’ll need to cut closely or a white border will show. Make sure the paper is made for your printer type. Our article on using a regular printer with transfer paper explains the inkjet and laser difference.
Print Settings and Loading
Set the paper type to something like photo, matte photo or iron-on, and choose the highest print quality. Print at 100% scale rather than shrinking to fit. The printable side is usually the blank one, and some papers have a grid or logo on the back. How you load it depends on the printer: many rear-tray printers print on the side facing up, while many bottom-tray printers print on the side facing down. Check your printer manual and test with plain paper first if unsure.
Pressing
Use a hard, flat surface rather than a soft ironing board. With a heat press, use the temperature and time printed on your paper. With an iron, turn steam off, press firmly with your weight and cover the whole design, including the edges. See using an iron instead of a heat press for tips.
Peeling and Aftercare
Hot peel papers are removed right after pressing, while cold peel papers need to cool first. Pull slowly at a low angle. After the cure time, wash inside out in cool water, avoid fabric softener and bleach, and dry on low heat or hang dry.
Common Mistakes
- Printing on the wrong side of the paper
- Forgetting to mirror light-paper designs
- Leaving steam on the iron
- Not trimming dark paper closely
- Washing the shirt too soon
- Pressing on an ironing board that is too soft for even pressure