What to Print On

How to Screen Print on Hessian and Burlap

Hessian, burlap and jute can take a screen print with the right design, ink and light squeegee touch. Learn setup, curing, heat care and troubleshooting.

On this page
  1. Can you screen print on hessian and burlap?
  2. What makes it tricky
  3. What you need
  4. Choose a design that suits the fabric
  5. Step by step
  6. Curing and heat safety
  7. Can you press DTF on burlap?
  8. Can you print on jute fabric?
  9. Troubleshooting
  10. Project ideas

Can you screen print on hessian and burlap?

Yes. Hessian, burlap and jute are closely related names for the same coarse, woven plant-fibre cloth (hessian is the common name in the UK, Australia and India, burlap in the US). Screen printing works on it, and it is a popular choice for rustic bags, banners, table runners and placemats. The texture gives prints a natural, slightly worn look, but it also makes the fabric harder to print than a smooth cotton tee. With realistic expectations and a bold design, you can get good results.

What makes it tricky

  • Open weave. There are real gaps between the threads, so ink can pass through unevenly and fine lines can break up.
  • Uneven surface. Thick and thin threads create texture, so the print will never be perfectly smooth.
  • Loose fibres. Burlap sheds lint and stray strands, which can clog the screen or stick in wet ink.
  • Absorbency. It can soak up a lot of ink, or very little, depending on the weave and any finish.
  • Heat sensitivity. Natural plant fibres can scorch if the cure temperature is too high.

Our guide to fabrics that are hard to screen print covers other tricky materials. Hessian is not on the avoid list, but it sits in the “needs care” group.

What you need

  • Hessian or burlap items. Pre-made bags, placemats, banners and runners are the easiest starting point. Choose a tighter weave for finer detail.
  • A screen with a stencil. A medium mesh count generally works better than a very fine one, because ink has to push through the rough surface. Vinyl stencils cut on a craft cutter are a simple option for bold shapes.
  • Textile ink. Water-based fabric inks and plastisol are both used; follow the manufacturer’s guidance. Thicker, more opaque inks cover the texture better.
  • A squeegee. A softer or medium squeegee gives you more control.
  • A hinge clamp or press. This helps you keep registration, especially if you want to print a second pass.
  • A lint roller. Use it on the surface before printing.
  • A piece of cardboard or board. Put it inside bags or underneath the fabric as support.
  • Tape or light adhesive. To hold the fabric flat.

Choose a design that suits the fabric

  • Use bold shapes, thick lettering and simple logos. Hairlines and tiny text will disappear into the weave.
  • One or two colours is plenty. Registration is harder on uneven fabric.
  • Embrace some imperfection. A slightly distressed, rustic result is part of the appeal.

Step by step

  1. Prepare the fabric. Shake it out and roll it with a lint roller to remove loose fibres. Iron it on a setting the fabric tolerates, if needed. Some printers flatten it with a little steam, but test first, since burlap can shrink or distort.
  2. Secure it. Tape it flat to the printing surface, or load it on the platen with a light adhesive. Slip card inside a bag so ink does not reach the back layer.
  3. Align the screen. Lock the screen in a hinge clamp or press. If you are printing without a hinge, remember that you get essentially one chance. Once you lift the screen, it is very hard to put it back in the same spot.
  4. Set the off-contact. Keep the screen just above the fabric so it peels away cleanly after the stroke. Too much distance can distort the print.
  5. Flood and print. Spread ink on the screen, then pull the squeegee. Use more ink with lighter pressure if you want solid colour. A thinner coat and firmer pressure give a worn, vintage effect. Try both on scrap.
  6. Lift and check. Raise the screen straight up and inspect. If you used a press, you can lower the screen again for a second pass to improve coverage.
  7. Clean the screen straight away. Fibres and ink dry quickly.

Curing and heat safety

Textile ink usually needs heat to set, but plant fibres can be sensitive. Burlap and jute are dry and can scorch, so use the lowest cure temperature and time the ink maker allows. Many printers prefer a heat gun or an iron on a protected surface over a hot press for this reason. Use a pressing cloth or parchment between the iron and the print, keep the heat moving, and never leave heat sources unattended near the fabric. Do a test piece first and check how the colour and fabric respond. Where the fabric is a bag with plastic or nylon trims, keep the heat away from them.

Can you press DTF on burlap?

DTF (direct-to-film) transfers rely on a smooth surface and good contact for the adhesive to bond. Burlap is rough, loose and uneven, so adhesion can be unreliable and results often vary. Some people have success, others see peeling or gaps. If you want to try, test on a scrap piece. Screen printing with thicker ink is generally more forgiving on hessian.

Can you print on jute fabric?

Yes. Jute is the fibre that most hessian and burlap is made from, so the same advice applies. Finer, more tightly woven jute cloth will carry more detail than coarse sacking.

Troubleshooting

  • Patchy ink. Use a little more ink and less pressure, or a second pass with a press.
  • Blurry edges. Lower the off-contact gap, reduce pressure or check that the fabric is flat.
  • Fibres in the print. Lint-roll again and wipe the screen between prints.
  • Scorching or yellowing. Cure at a lower temperature or for less time.
  • Cracked ink. Use a more flexible ink, or print thinner.

Project ideas

Hessian works well for tote bags, wedding signs and table runners, coasters, seasonal banners, plant pot covers and gift bags. If you plan to print on tote bags more broadly, see our guide to screen printing tote bags and canvas. If you are new to the craft overall, begin with what screen printing is and how it works.

The complete guide to what to print on

What Is Screen Printing? History, Process and Best Uses
Read the guide

Keep exploring

Guides from other topics

All topics →