What to Print On

What fabric is not good for screen printing?

Nylon, spandex, sheer silk and coated fabrics are the hardest to screen print. See why they cause problems and which fabrics give the best results.

On this page
  1. Short answer
  2. Fabrics that are hard to screen print
  3. Polyester: possible, but with caveats
  4. Why these fabrics cause problems
  5. Fabrics that work well
  6. How to test before printing

Short answer

No common fabric is impossible to screen print, but some are much harder than others. The ones that cause the most trouble are 100% nylon, highly stretchy fabrics such as spandex or Lycra, very sheer or delicate fabrics such as silk and chiffon, and waterproof or coated fabrics. Standard inks can peel off, crack, bleed through or be damaged by the heat needed to cure them. If you are unsure, 100% cotton or a cotton-rich blend is the safest choice, which is why most beginner projects use it.

Fabrics that are hard to screen print

Nylon

Nylon is smooth and tends to repel water, which makes it hard for standard inks to grip. Prints on plain nylon can peel or wear off. Some printers use special inks or bonding additives made for nylon, and they test carefully, so it is not impossible, but it is not a good choice for a first project. Nylon is also sensitive to heat, which matters when you cure the ink.

Spandex and Lycra

Very stretchy fabrics move a lot after printing. Standard plastisol or water-based ink film does not stretch as far as the cloth does, so the print can crack, distort or look patchy once the garment is worn. Printers sometimes add stretch additives or use stretch-formulated inks, but results on high-stretch fabrics are less predictable. A small amount of elastane in a cotton blend is usually fine.

Sheer and delicate fabrics (silk, chiffon, georgette)

Thin, open fabrics let ink pass straight through or spread along the fibres, which blurs edges. The heat used to cure many inks can also scorch or warp delicate fibres. Silk can be printed with inks made for the purpose and a careful approach, but it needs more skill than printing on cotton. If you are planning something like a saree, see our guide to screen printing large fabric and sarees.

Waterproof, coated and heavily treated fabrics

Rain jackets, vinyl-coated cloth and fabrics with a water-repellent finish can stop ink from bonding. The finish sits between the ink and the fibre. If the label mentions a repellent, coating or laminate, expect adhesion trouble and test first.

Loose, bulky or very rough weaves

Open or shedding weaves absorb ink unevenly and can leave gaps in fine lines. They can still work for bold designs. Hessian (burlap) is a good example: it can be printed, but it needs a simpler design and a different approach from a smooth T-shirt.

Polyester: possible, but with caveats

Polyester is widely printed, especially for sportswear, but it needs more care than cotton. Two issues come up often:

  • Dye migration. On polyester, the fabric’s dye can move up into the ink when heated, which can tint a white or light print, particularly on red or other strong colours. Printers use low-cure inks or blocker (barrier) bases to manage this.
  • Heat sensitivity. Polyester can scorch or melt if the cure temperature is too high or held too long.

Use inks that are recommended for polyester and follow the manufacturer’s cure instructions.

Why these fabrics cause problems

Most problems come down to a few causes:

  • Adhesion. Smooth, synthetic or treated fibres do not absorb ink, so it sits on top and can lift.
  • Flexibility. Ink forms a film. If the fabric stretches more than that film can, it cracks.
  • Heat. Many inks must be heated to cure. Fibres that scorch or melt limit your options.
  • Structure. Sheer or loose fabrics let ink bleed through or spread.

Fabrics that work well

  • 100% cotton. Absorbent and forgiving, with smooth ringspun or combed cotton giving crisper detail on fine designs.
  • Cotton-polyester blends. Often a good compromise, though the higher the polyester content, the more caution is needed.
  • Canvas and sturdy cotton twill. Good for bags and aprons. See our guide to screen printing tote bags and canvas.
  • Linen and other natural fibres. Often workable, but the texture affects fine detail.

How to test before printing

  1. Check the care label for fibre content and finishes.
  2. Print a small test on a hidden area or offcut using the same ink and screen you plan to use.
  3. Cure it as you would the final piece.
  4. Stretch it gently, rub it, then wash it according to the ink maker’s guidance.
  5. If it cracks, peels or discolours, change the ink, fabric or approach before printing the full run.

For a broader introduction to what the process suits, see what screen printing is best suited for.

The complete guide to what to print on

What Is Screen Printing? History, Process and Best Uses
Read the guide

Keep exploring

Guides from other topics

All topics →