Short answer: two realistic routes
There are two main ways to get a printer for sublimation t-shirts:
- A purpose-built sublimation printer, such as the Sawgrass SG500 or SG1000, sold and supported for sublimation.
- A converted Epson EcoTank, where a new refillable-tank inkjet is filled with sublimation ink instead of the regular ink it was built for.
Neither is the single “best” choice. Purpose-built printers cost more up front and are designed to work with their own ink and color profiles. Converted EcoTanks are cheaper to buy and widely used by hobbyists, but they come with trade-offs you should understand first.
Because printer lineups change from year to year, any list of “best printers” ages quickly. Treat the model names below as examples, and check what is currently sold before you buy.
Purpose-built sublimation printers
Printers like the Sawgrass SG500 and SG1000 are made for sublimation. They are commonly described as offering more controlled setups, with matched ink and color profiles from the manufacturer. The SG500 prints on smaller sheets (around 8.5 x 14 inches), while the SG1000 supports larger sheets (around 11 x 17 inches, with larger sizes possible using a bypass tray).
Things to weigh:
- Higher purchase price and, usually, higher ink costs.
- Consistent color when you stay within the manufacturer’s system.
- Designed for the work, so a convenient choice for a small business that wants fewer variables.
Check the manufacturer’s current specifications before you buy.
Converting an Epson EcoTank
An EcoTank has refillable ink tanks rather than cartridges, so people fill them with sublimation ink in place of the original ink. Many sublimation crafters use EcoTank models like the ET-2800 for this. The attraction is a lower starting cost and cheap ink bottles.
Points to know before converting:
- Start with a new printer that has never been filled with regular ink. Mixing ink types is a common cause of problems.
- Don’t plan to switch back. Once a printer is filled with sublimation ink, treat it as a dedicated sublimation printer.
- Check compatibility and firmware. Printer firmware updates can affect third-party ink, so research your model before updating.
- Warranty: using non-original ink may affect support or warranty. Check the terms.
- Use a matching ink, paper and color profile. Third-party inks differ, and a profile built for one ink may not suit another.
- Maintain it. Print a small test page regularly. Sublimation printers can clog if they sit unused.
The ET-4760, ET-3760, ET-2800 and similar models
Searches often pair “EcoTank ET-4760” with “t-shirt sublimation.” The ET-4760 and ET-3760 are letter-size EcoTank all-in-ones, in the same family as the ET-2800, and they are the kind of printer hobbyists have converted. We can’t promise any specific model will behave the same way for you, because Epson revises hardware and firmware, and some models are discontinued or replaced.
When comparing models:
- Look for forums or guides that describe conversions on your exact model, and check how recent they are.
- Confirm the paper sizes it accepts.
- Consider whether you need the scanner and copier features. A converted printer’s scanner can still be used, see how to scan from an Epson printer to a Mac, though some people prefer to keep a separate printer for regular documents.
Whether the ET-4760 or ET-3760 is a “good printer” depends on what you need: as an everyday all-in-one they are popular, but for sublimation they are a budget route with the conversion caveats above.
Print size: the limit most beginners hit
Many home EcoTanks only print up to letter size (8.5 x 11 inches) or legal. That is fine for small designs and left-chest logos but too small for a full-front shirt graphic. Options include:
- A wider-format printer that handles 11 x 17 or 13 x 19 sheets.
- Printing a design in tiles (harder to line up).
- Ordering larger transfers from a service.
Some competitor guides suggest a t-shirt design may need around 13 x 19 inch paper. For small-business use, decide your typical design size first, then choose a printer.
What else your setup needs
The printer is only one part. You also need:
- Sublimation paper that suits your printer, see our guide to sublimation paper for t-shirts.
- A heat press with reliable temperature, time and pressure control.
- Polyester shirts, see the best t-shirt material for sublimation.
- Heat-resistant tape, butcher paper and a lint roller.
If you are new to the whole process, start with our beginner’s sublimation t-shirt tutorial.
Is DTF or sublimation cheaper?
It depends on what you print. Sublimation needs a printer, ink, paper and a press, but works only on light polyester and coated items. DTF (direct-to-film) can handle dark and cotton shirts but uses film, powder and a curing step, and a DTF printer is a different machine from a sublimation printer. A fair comparison depends on your volume and the products you plan to sell. If your main goal is dark shirts, sublimation won’t do the job; see how to sublimate dark shirts for what is realistic.
Which route fits you
- Hobby or small craft projects, small designs, low budget: a conversion is a common starting point, accepting the risks.
- Small business that wants predictable color and support: consider a purpose-built sublimation printer.
- Larger designs or all-over prints: prioritize print size over brand.
- Mostly dark cotton shirts: sublimation isn’t the right method. See sublimation vs pigment printing.